[global]
        follow symlinks = yes
        wide links = yes
        allow insecure wide links = yes
    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
        workgroup = WORKGROUP

    # server string is the equivalent of the NT Description field
        server string = %h server (Samba, Ubuntu)

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
        dns proxy = no

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = yes



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
        log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
        max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
        syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
        panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # Server role. Defines in which mode Samba will operate. Possible
    # values are "standalone server", "member server", "classic primary
    # domain controller", "classic backup domain controller", "active
    # directory domain controller". 
    #
    # Most people will want "standalone sever" or "member server".
    # Running as "active directory domain controller" will require first
    # running "samba-tool domain provision" to wipe databases and create a
    # new domain.
        server role = standalone server

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
        passdb backend = tdbsam

        obey pam restrictions = yes

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
        unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
        pam password change = yes

    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
        map to guest = bad user

    ########## Domains ###########

    #
    # The following settings only takes effect if 'server role = primary
    # classic domain controller', 'server role = backup domain controller'
    # or 'domain logons' is set 
    #

    # It specifies the location of the user's
    # profile directory from the client point of view) The following
    # required a [profiles] share to be setup on the samba server (see
    # below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    # This allows machine accounts to be created on the domain controller via the 
    # SAMR RPC pipe.  
    # The following assumes a "machines" group exists on the system
    ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.  
    ; add group script = /usr/sbin/addgroup --force-badname %g

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;   usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
        usershare allow guests = yes

    #======================= Share Definitions =======================

    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares. This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no

    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ;   read only = yes

    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700

    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700

    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.
    # Un-comment the following parameter to make sure that only "username"
    # can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S

    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   read only = yes

    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700

    [printers]
        comment = All Printers
        browseable = no
        path = /var/spool/samba
        printable = yes
        guest ok = no
        read only = yes
        create mask = 0700

    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers
        browseable = yes
        read only = yes
        guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # You may need to replace 'lpadmin' with the name of the group your
    # admin users are members of.
    # Please note that you also need to set appropriate Unix permissions
    # to the drivers directory for these users to have write rights in it
    ;   write list = root, @lpadmin

    [share]
        comment = share folder
        browseable = yes
        path = /home/testuser/share
        create mask = 0777
        directory mask = 0755
        valid users = testuser
        force user = testuser
        force group = testuser
        public = yes
        available = yes
        writeable = yes